HP Workstation Z240


HP Workstation Z240

Base Configuration Includes:

Processors: Intel® Xeon® Processor E3-1225 v5 (8M Cache, 3.30 GHz) Cores 4, Threads 4
Hard Drives: 500 GB
Memory: 8 GB
Optical Drive: DVD-ROM
Graphic Card: NVIDIA Quadro K620


  • Description
  • Reviews (0)


System board form factor
ATX 24.89 x 24.38 mm (9.8 x 9.6 in)
Processor socket
Single LGA 1151
CPU bus speed
Memory expansion slots
4 DDR4 memory slots
Memory type supported
DDR4, UDIMM (unbuffered), ECC and non-ECC
Memory modes
Non-interleaved for single channel. Interleaved when both channels are populated.
Memory speed supported
2133MT/s DDR4
Memory protection
ECC available on data
Maximum memory
64 GB
Memory configuration
4GB, 8GB and 16GB non-ECC/4GB, 8GB and 16GB ECC unbuffered DIMMs are supported.
ECC and non-ECC memory DIMMs cannot be mixed on the same system.
PCI express connectors
1 PCI Express Gen3 slot x 1 mechanical/ x 1 electrical (full height, full length)
1 PCI Express Gen3 slot x 16 mechanical/ x 16 electrical (full height, full length)
1 PCI Express Gen3 slot x 4 mechanical/ x 4 electrical (full height, full length)
1 PCI Express Gen3 slot x 16 mechanical/ x 4 electrical (full height, full length)


In the PCIe Gen3 (x 16 electrical/x 16 mechanical) slot, if it is not being used for a graphics card, only cards certified as After Market Options for this platform are supported.
PCI connectors (5 V)
1 (optional) PCI slot, full height, full length
Supported drive interfaces
Integrated (4) Serial ATA interfaces (6 Gb/s SATA). One port can optionally be used for eSATA.
RAID 0 and 1 supported. Factory integrated RAID is Microsoft Windows only. RAID 5 is supported by Software XOR.
Serial Attached SCSI
Integrated RAID:


Requires identical hard drives (speeds, capacity, interface)
Integrated graphics:
Intel HD Graphics 530 (on Core i3/i5/i7-6xxx processors); Intel Integrated Graphics for Xeon processors
Based on Unified Memory Architecture (UMA) – a region of system memory is reserved and dedicated to the graphics display.
Support for Mic1 DVI-D and 2 DP 1.2 graphics ports integrated in motherboard; Supports up to three simultaneous displays across DP and DVI-D outputs.
1 DVI-D and 2 DP 1.2 graphics ports integrated in motherboard; Supports up to three simultaneous displays across DP and DVI-D outputs.
Maximum resolution supported on DVI- D ports: 1920 x 1200 at 60Hz
Maximum resolution supported on DP 1.2 ports: 3840×2160 at 60Hz
Network controller:
Integrated Ethernet PHY Connection I219LM. Management capabilities: WOL, PXE 2.1 and AMT 9
External SATA (eSATA):
External SATA (eSATA): 1 port eSATA capable (SATA 3) with optional eSATA after-market option cable kit
IDE connector:
Floppy connector:
1 internal header (requires optional serial port adapter kit)
2nd Serial:
1 internal header (optional parallel port adapter required)
HD integrated audio:
USB connectors
Front: 2 USB 3.0, 1 USB 2.0, 1 USB 2.0 charging data port
Rear: 4 USB 3.0, 2 USB 2.0
Internal: 1 USB 3.0 and 3 USB 2.0 ports available as 2 separate 2 x 6 (3.0 x 1.2.0 x 1) and 1 x 6 (2.0 x 1) headers: supports 1 HP Internal USB port kits plus one USB 3.0 SD card reader
HD integrated audio
Flash ROM
CPU fan header
Chassis fan header
1 rear system chassis fan header
Front control panel/speaker header
CMOS battery holder – lithium
Integrated trusted platform module
Integrated TPM 1.2
The TPM module disabled where restricted by law, i.e. Russia
Power supply headers
Power switch, power LED and hard drive LED header
Clear password jumper
USB or PS/2
Operating voltage range
90-269 VAC
Maximum: 890 btu/hr (224 kcal/hr)
Rated voltage range
100-240 VAC
Rated line frequency
50-60 Hz
Operating line frequency range
47-66 Hz
Rated input current
6A at 100-240 V
Heat dissipation
Typical: 444 btu/hr (112 kcal/hr)
Maximum: 1484 btu/hr (374 kcal/hr)
Power supply fan
80 x 80 x 25 mm (3.1 x 3.1 x 0.98 in) 4-wire PWM
ENERGY STAR qualified (config dependent)
CECP compliant at 220V
FEMP standby power compliant
Yes, with wake-on-LAN disabled: < 2 W in 55 – power off
Built-in self test (BIST) LED
Surge tolerant full ranging power supply (withstands power surges up to 2000 V)
Hood lock header
ErP Lot 6- Tier 1 compliance at 230 V
ErP Lot 6- Tier 2 compliance at 230 V
Environmental requirements
Operating: 5° to 35° C (40° to 95° F)
Non-operating: -40° to 60° C (-40° to 140° F)
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95%, 38.7° C (101.6° F)
maximum wet bulb temperature
Maximum altitude:
Operating: 3,000 m (10,000 ft)
Non-operating: 9,100 m (30,000 ft)
Operating: 40 g, 2-3 ms, half-sine
Non-operating: 160 cm/s, 2-3 ms, half-sine. Square: 422 cm/s, 20 g
Operating random: 0.5g (rms), 5-300 Hz
Non-operating random: 2.0g (rms), 10-500 Hz
Above 1524 m (5,000 ft) altitude, maximum operating temperature is de-rated by 1.8° F (1° C) per 305 m (1000 ft) elevation increase.


There are no reviews yet.

Be the first to review “HP Workstation Z240”