Hp HPE ProLiant DL380 G6

-18%

Hp HPE ProLiant DL380 G6

Base Configuration Includes:

Processors: Intel® Xeon® Processor X3450 (8M Cache, 2.26 GHz, 5.86 GT/s Intel® QPI) Cores 4, Threads 8
Hard Drives: Hard Drive 146 GB x 4 hard drives SAS, 2.5, 10k
Memory: 8 GB DDR3
Power Supply
Dual
Optical DVD Rom
Raid Card
D4102

35,000.00

  • Description
  • Reviews (0)

Description

Physical specifications

Feature
Description

Dimensions (H x W x D)
(with bezel)

  • SFF Drives: 3.38 x 17.54 x 27.25 inches (8.59 x 44.55 x 69.22 cm)
  • LFF Drives: 3.38 x 17.54 x 29.25 inches (8.59 x 44.55 x 74.30 cm)

Weight
(approximate)

  • Maximum
    (all hard drives, power
    supplies, and processors
    installed):
    60.00 lb (27.27 kg)
  • Minimum
    (one hard drive, power
    supply, and processor
    installed):
    47.18 lb (21.45 kg)

top

Environmental specifications

Feature
Description

System Inlet Temperature

  • Operating: 10° to 35° degree Celsius (50° to 95° degree Fahrenheit) at sea level with an
    altitude derating of 1.0° degree Celsius per every 305 m
    (1.8° degree Fahrenheit per every 1000 feet) above sea level to a
    maximum of 3050 m (10,000 feet), no direct
    sustained sunlight. Maximum rate of change is
    10° degree Celsius/hr (18° degree Fahrenheit/hr). The upper limit may be
    limited by the type and number of options
    installed.

    System performance may be reduced if operating
    with a fan fault or above 30° degree Celsius (86° degree Fahrenheit).

  • Non-operating: -30° to 60° degree Celsius (-22° to 140° degree Fahrenheit). Maximum rate of
    change is 20° degree Celsius/hr (36° degree Fahrenheit/hr).

Relative Humidity
(non-condensing)

  • Operating: 10 to 90% relative humidity (Rh), 28° degree Celsius (82.4° degree Fahrenheit)
    maximum wet bulb temperature, non-condensing.
  • Non-operating: 5 to 95% relative humidity (Rh), 38.7° degree Celsius
    (101.7° degree Fahrenheit) maximum wet bulb temperature, non-condensing.

Altitude

  • Operating: 3050 m (10,000 feet). This value may be limited by
    the type and number of options installed.
    Maximum allowable altitude change rate is 457
    m/min (1500 feet/min).
  • Non-operating: 9144 m (30,000 feet). Maximum allowable
    altitude change rate is 457 m/min (1500 feet/min).

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23° degree Celsius ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).

NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.

  • Idle

    LWAd – 1P SKU – 4.1 B

    LWAd – 2P SKU – 4.7 B

    LpAm – 1P SKU – 22 dBA

    LpAm – 2P SKU – 28 dBA

  • Operating

    LWAd – 1P SKU – 4.1 B

    LWAd – 2P SKU – 4.7 B

    LpAm – 1P SKU – 22 dBA

    LpAm – 2P SKU – 28 dBA

Emissions Classification (EMC)

FCC Rating

  • Class A

Normative Standards

  • CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

top

Power specifications

Feature
Description

Input Requirements
(per power supply)

  • Rated Line Voltage: 100 to 120 V ac,
    200 to 240 V ac
  • Rated Input Current:For 1200 W Power Supply:
    • 10 A (at 100 VAC)

    • 4.9 A (at 200 VAC)

    For 750 W Power Supply:

    • 8.9 A (at 100 VAC)

    • 4.3 A (at 200 VAC)

    For 460 W Power Supply:

    • 5.5 A (at 100 VAC)

    • 2.6 A (at 200 VAC)

  • Rated Input Frequency: 50 to 60 Hz
  • Rated Input Power:For 1200 W Power Supply:
    • 930 W (at 100 VAC)

    • 1348 W (at 200 VAC)

    For 750 W Power Supply:

    • 857 W (at 100 VAC)

    • 824 W (at 200 VAC)

    For 460 W Power Supply:

    • 526 W (at 100 VAC)

    • 505 W (at 200 VAC)

BTU Rating

Maximum:

  • For 1200 W Power Supply
    • 3530 BTU/hr (at 100 VAC)

    • 4600 BTU/hr (at 200 VAC)

  • For 750 W Power Supply
    • 2925 BTU/hr (at 100 VAC)

    • 2812 BTU/hr (at 200 VAC)

  • For 460 W Power Supply:
    • 1794 BTU/hr (at 100 VAC)

    • 1725 BTU/hr (at 200 VAC)

Power Supply Output
(per power supply)

Rated Steady-State Power:

  • For 1200 W Power Supply:
    • 800 W (at 100 VAC)

    • 900 W (at 120 VAC)

    • 1200 W (at 200 to 240 VAC)

  • For 750 W Power Supply:
    • 750 W (at 100 to 120 VAC)

    • 750 W (at 200 to 240 VAC)

  • For 460 W Power Supply:
    • 460 W (at 100 to 120 VAC)

    • 460 W (at 200 to 240 VAC)

Maximum Peak Power:

  • For 1200 W Power Supply:
    • 800 W (at 100 VAC)

    • 900 W (at 120 VAC)

    • 1200 W (at 200 to 240 VAC)

  • For 750 W Power Supply:
    • 750 W (at 100 to 120 VAC)

    • 750 W (at 200 to 240 VAC)

  • For 460 W Power Supply:
    • 460 W (at 100 to 120 VAC)

    • 460 W (at 200 to 240 VAC)

top

Smart Array P410i Controller

Specification
Description

Dimensions

Embedded

Disk Drive and Enclosure Interface – Transfer rate

6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)

SAS Connectors

2 internal 4X connectors

Cache Memory Speed

DDR2-800MHz with 40 or 72-bit wide bus

Server Interface

x4 PCIe 2.0 provides 2GB/s maximum bandwidth

SAS Speed

8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth

Cache Memory

Zero Memory RAID has no cache memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC

Logical Drives Supported

Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache

Host Memory Addressing

64-bit, supporting greater than 4GB server memory space

RAID Support

RAID 6, 6+0 (Advanced Data Guarding)1

RAID 5, 5+0 (Distributed Data Guarding)2

RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)

NOTE: 1. RAID 6, 6+0 can be enabled with one of the following combinations:

  • 256MB cache, Battery kit and Smart Array Advanced Pack License key option upgrades

  • 512MB BBWC/FBWC and Smart Array Advanced Pack License key option upgrades

  • 1G FBWC and Smart Array Advanced Pack License key option upgrades

2. A minimum or 256 MB cache is required to enable RAID 5, 5+0 support

top

HP NC382i Dual Port Multifunction Gigabit Server Adapters

Specifications
Description

Network Interface

10Base-T/100Base-TX/1000Base-TX

Compatibility

  • IEEE 802.3 10Base-T

  • IEEE 802.3ab 1000Base-T

  • IEEE 802.3u 100Base-TX

  • IEEE 802.3ad 1000Base-TX

  • IEEE 802.1p 100Base-TX

  • IEEE 802.1q 100Base-TX

Data Transfer Method

PCI Express, four lanes (x4)

Controller

BCM5709C

Network Transfer Rate

10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s

Connector

Two RJ-45

Cable Support

10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
100Base-TX
Category 5 or higher UTP;
up to 328 ft (100 m)
1000BaseTX
Category 5 or higher UTP;
up to 328 ft (100 m)

top

HP Integrated Lights-Out 2 (iLO 2)
integrated on system board

Specifications
Description

Architecture

32-bit PCI-based health and remote management ASIC

Processor

32-bit RISC processor core running at 66MHz

Upgradeability

Option firmware upgradeable via Flash ROM

Operating System Support

  • Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)

  • Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)

  • Microsoft Windows Server 2003 and Windows Server 2003 R2, and Windows Server 2003 for Extended Systems Standard Edition, Enterprise Edition

  • Red Hat Enterprise Linux 5.4 (32bit and 64bit)

  • SUSE LINUX Enterprise Server 11 (32bit and 64bit)

  • SUSE LINUX Enterprise Server 10 (32bit and 64bit)

  • VMware ESX 4.0

  • VMware ESX 3.5.0

  • Microsoft Windows XP Professional Edition

  • Microsoft Windows Vista Business and Ultimate Editions

  • Red Hat Enterprise Linux Desktop 5.00

  • SUSE Linux Enterprise Desktop 11

  • SUSE Linux Enterprise Desktop 10

Client Browser Support

  • Microsoft Internet Explorer 7

  • Microsoft Internet Explorer 6

  • Firefox 3.5 (on supported Windows and Linux systems)

  • Firefox 3.0 (on supported Windows and Linux systems)

Command Line Support

  • Telnet, Secure Shell and serial port access

  • Secure Socket Layer

  • Secure Shell version 2 (Password and certificate)

Security

Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting interface
RC4 encryption of video

Directory Support Services

Active Directory v1.0 (Windows 2003)

Driver Support

  • Health Driver (HP ProLiant iLO 2 Management Controller Driver)

  • iLO Management Channel Interface Driver

Management protocols supported

SNMP 2, IPMI 2.0 (KCS interface), DMTF Server Management Command Line Protocol Specification
(SM CLP), DMTF Web Services Management Specification (WS Management)

top

Reviews

There are no reviews yet.


Be the first to review “Hp HPE ProLiant DL380 G6”