Dell Precision T7500


Dell Precision T7500

Base Configuration Includes:

Processors: Intel® Xeon® Processor X5570 (8M Cache, 2.93 GHz, 6.40 GT/s Intel® QPI) Cores 4, Threads 8
Hard Drives: 1 TB
Memory: 16 GB DDR3
Optical Drive: DVD-ROM
Graphic Card: Quadro 2000


  • Description
  • Reviews (0)


Precision T7500
Manufacturer Model
Intel Intel 5520
Back to Top
Manufacturer Models
Intel Intel® Xeon® 5600 series processors up to six-cores, 6.4GT/s (Intel QuickPath Interconnect) and 12MB shared cache. Turbo Mode and HyperThreading technology on select processors. All processors are 64-bit, support Intel DBS (demand-based switching) and Intel VT (Intel Virtualization Technology).
Back to Top
Type Models
Discrete PCIe 2.0 x 16 Up to 2 PCI Express® x16 Gen 2 graphics cards (maximum of 225 W)
AMD FireGL V5700, 512MB
AMD FireGL V7700, 512MB
AMD FirePRO MV2260, 256MB
AMD FirePro V8700, 1GB
AMD FirePro V3750, 256MB
AMD FirePro V4800, 512MB
AMD FirePro V5800, 1GB
AMD FirePro V5900, 2gb
AMD FirePro V7800, 2GB
AMD FirePro V7900, 2GB
NVIDIA Quadro NVS420, 512MB
NVIDIA Quadro 600, 1GB
NVIDIA Quadro 2000, 1GB
NVIDIA Quadro 4000, 2GB
NVIDIA Quadro 5000, 2.5GB
NVIDIA Quadro FX580, 512MB
NVIDIA Quadro FX1800, 768MB
NVIDIA Quadro FX3700, 512MB
NVIDIA Quadro FX3800, 1GB
NVIDIA Quadro FX4800, 1.5GB
NVIDIA Quadro FX5800, 4GB
NVIDIA Tesla C2075 computing processor, 6GB
NVIDIA Tesla C2050 computing processor, 3GB
Back to Top
Specifications Supported configurations
Memory type DDR3 1066 MHz and 1333 MHz Registered DIMM ECC
Memory connectors 6 DIMM slots on motherboard; an additional 6 DIMM slots available on optional riser
Supported memory module capacities 1 GB, 2 GB, 4 GB, 8 GB, and 16GB RDIMM ECC
Minimum memory 2 GB
Maximum memory 96 GB on motherboard; 192 GB with optional riser
Back to Top
Type Model
Integrated ADI1984A integrated audio
Back to Top
Type Model
Integrated Broadcom 5761 Gigabit Ethernet (GbE) PCI-Express
Back to Top
Type Specifications
Externally accessible drive bays One 3.5-inch drive bay (FlexBay)
Two 5.25-inch drive bays
Internally accessible drive bays Four 3.5-inch SATA drive bays
Available devices Up to two of the following 5.25-inch devices: SATA DVD, SATA CD-RW/DVD Combo, SATA DVD+/-RW, SATA BD Combo (Blu-Ray playback onlyl), SATA Blu-ray R/W
One 3.5-inch USB media card reader
Internal USB floppy drive
External USB 3.5 inch drive
An additional 3.5-inch SATA hard drive may be placed in one of the 5.25 inch bays with an optional adapter
Back to Top
External Connectors
Type of Connector Specification
Audio 5.1 channel support
Video Video card dependent:
DVI connector
DisplayPort connector
Network Adapter One RJ-45 connector
USB USB 2.0 compliant, support 2.0 A sustained charge to power external USB devices:
Front panel – Two USB 2.0
Back panel – Six USB 2.0
Internal – Three USB 2.0
Serial One 9-pin connector (rear), 16550C compatible
PS/2 Two 6-pin mini-DIN connector
IEEE 1394a One on the front panel; one on the back I/O panel
Parallel port One on the back I/O panel
eSATA port One on the back I/O panel
Back to Top
System Board Connectors
Type of Connector Specification
Serial ATA (Hard Drive) Five 7-pin connectors
Internal USB device Two 10-pin connector (supports four USB ports)
Processor fan One 4-pin connector
Chassis fan Three 3-pin connector
PCI 2.3 one 124-pin connector
PCI Express x8 Two 36-pin connector
PCI Express x16 Two 164-pin connectors
Front panel control One 10-pin connector
Front panel USB Two 10-pin connectors
Front panel audio HDA header One 10-pin connector
Processor One connector; Second connector on optional riser
Memory Six 240-pin connectors
Power 12 V One 4-pin connector
Power One 24-pin connector
Back to Top
Diagnostic Indicators
Indicator Example Description
Power Button LED Off-system is off or unplugged
Blinking amber light-initial state of LED at power up; indicates system has power, but the POWER_GOOD signal is not yet active.
If the Hard Drive LED is off, it is probable that the power supply needs to be replaced. If the Hard Drive LED is on, it is probable that an onboard regulator or VRM has failed. Look at the diagnostic LEDs for further information.
Solid amber light-second state of the LED at power up. Indicates the POWER_GOOD signal is active and it is probable that the power supply is fine. Look at the diagnostic LEDs for further information.
Blinking green light – system is in a low power state, either S1 or S3. Look at the diagnostic LEDs to determine which state the system is in.
Solid green light – the normal power state of a functioning machine. The BIOS will turn the LED to this state to indicate it has started fetching opcodes.
Diagnostic lights Off – computer is off or has completed POST
Green/blinking light – see the service manual for specific diagnostic codes
Back to Top
Expansion Bus
Type Speed
PCI Express 1.1 One x4 slot; two x8 slots
PCI Express 2.0 2.0 x16 slot
PCI 2.3 PCI 2.3(32-bit, 33MHz): 133 MB/s
SATA 1.0 and 2.0 1.5 Gbps and 3.0 Gbps
USB 2.0 and 3.0 1.2 Mbps Low Speed, 12 Mbps Full Speed, 480 Mbps High Speed
Back to Top
Variable Specification
Coin-cell battery 3 V CR2032 lithium coin cell
Voltage 100-240 VAC, 50/60 Hz, 12.0 A
Wattage 1100 W
Back to Top
Dimension Specification
Height 56.50 cm (22.25 inches)
Width 21.60 cm (8.50 inches)
Depth 55.30 cm (21.80 inches)
Weight 24.90 kg (55.0 lb)
Back to Top
Variable Specification
Temperature Operating: 10°C to 35°C (50°F to 95°F)
Storage: -40°C to 65°C (-40°F to 149°F)
Relative humidity (maximum) 20% to 80% (non-condensing)
Maximum vibration Operating: 5 Hz to 350 Hz at 0.0002 G²/Hz
Storage: 5 Hz to 500 Hz at 0.001 to 0.01 G²/Hz
Maximum shock Operating: 40 G +/- 5% with pulse duration of 2 msec +/- 10% (equivalent to 51 cm/sec [20 in/sec])
Storage: 105 G +/- 5% with pulse duration of 2 msec +/- 10% (equivalent to 127 cm/sec [50 in/sec])
Altitude (Maximum) Operating: -15.2 m to 3048 m (-50 ft to 10,000 ft)
Storage: -15.2 m to 10,668 m (-50 ft to 35,000 ft)
Airborne contaminant level G2 or lower as defined by ISA-S71.04-1985
Back to Top


There are no reviews yet.

Be the first to review “Dell Precision T7500”